10H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
10H-SS |
Stainless Steel |
10 |
90 |
|
10HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
10HR-SS |
Stainless Steel |
10 |
90 |
|
10SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
10SH-SS |
Stainless Steel |
10 |
100 |
|
10SHR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
10SHR-SS |
Stainless Steel |
10 |
100 |
|
11H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
11H-SS |
Stainless Steel |
11 |
99 |
|
11HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
11HR-SS |
Stainless Steel |
11 |
99 |
|
11SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
11SH-SS |
Stainless Steel |
11 |
110 |
|
11SHR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
11SHR-SS |
Stainless Steel |
11 |
110 |
|
12H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
12H-SS |
Stainless Steel |
12 |
108 |
|
12HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
12HR-SS |
Stainless Steel |
12 |
108 |
|
12SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
12SH-SS |
Stainless Steel |
12 |
120 |
|
12SHR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
12SHR-SS |
Stainless Steel |
12 |
120 |
|
13H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
13H-SS |
Stainless Steel |
13 |
117 |
|
13HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
13HR-SS |
Stainless Steel |
13 |
117 |
|
13SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
13SH-SS |
Stainless Steel |
13 |
130 |
|
14H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
14H-SS |
Stainless Steel |
14 |
126 |
|
14SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
14SH-SS |
Stainless Steel |
14 |
140 |
|
15H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
15H-SS |
Stainless Steel |
15 |
135 |
|
15SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
15SH-SS |
Stainless Steel |
15 |
150 |
|
16H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
16H-SS |
Stainless Steel |
16 |
144 |
|
16SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
16SH-SS |
Stainless Steel |
16 |
160 |
|
1H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- 36" high handrail
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
1H-SS |
Stainless Steel |
1 |
9 |
|
1NH-SS
-
Stainless Steel Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
1NH-SS |
Stainless Steel |
1 |
9 |
|
2H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
2H-SS |
Stainless Steel |
2 |
18 |
|
2NH-SS
-
Stainless Steel Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
2NH-SS |
Stainless Steel |
2 |
18 |
|
2SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
2SH-SS |
Stainless Steel |
2 |
20 |
|
2SNH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- Up to 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
2SNH-SS |
Stainless Steel |
2 |
20 |
|
3H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
3H-SS |
Stainless Steel |
3 |
27 |
|
3NH-SS
-
Stainless Steel Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
3NH-SS |
Stainless Steel |
3 |
27 |
|
3SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
3SH-SS |
Stainless Steel |
3 |
30 |
|
3SNH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- Up to 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
3SNH-SS |
Stainless Steel |
3 |
30 |
|
4H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
4H-SS |
Stainless Steel |
4 |
36 |
|
4NH-SS
-
Stainless Steel Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
4NH-SS |
Stainless Steel |
4 |
36 |
|
4SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
4SH-SS |
Stainless Steel |
4 |
40 |
|
4SNH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- Up to 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
4SNH-SS |
Stainless Steel |
4 |
40 |
|
5H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
5H-SS |
Stainless Steel |
5 |
45 |
|
5NH-SS
-
Stainless Steel Mobile Ladder Stand -No handrail
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Four 3" spring-loaded, non-marking casters
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
5NH-SS |
Stainless Steel |
5 |
45 |
|
5SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships fully assembled
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
5SH-SS |
Stainless Steel |
5 |
50 |
|
6H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
6H-SS |
Stainless Steel |
6 |
54 |
|
6HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
6HR-SS |
Stainless Steel |
6 |
54 |
|
6SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
6SH-SS |
Stainless Steel |
6 |
60 |
|
6SHR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
6SHR-SS |
Stainless Steel |
6 |
60 |
|
7H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 300 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
7H-SS |
Stainless Steel |
7 |
63 |
|
7HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only) steel and stainless steel
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
7HR-SS |
Stainless Steel |
7 |
63 |
|
7SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
7SH-SS |
Stainless Steel |
7 |
70 |
|
7SHR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only) steel and stainless steel
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
7SHR-SS |
Stainless Steel |
7 |
70 |
|
8H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
8H-SS |
Stainless Steel |
8 |
72 |
|
8HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
8HR-SS |
Stainless Steel |
8 |
72 |
|
8SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
8SH-SS |
Stainless Steel |
8 |
80 |
|
8SHR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
8SHR-SS |
Stainless Steel |
8 |
80 |
|
9H-SS
-
Stainless Steel Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 15" platform depth
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
9H-SS |
Stainless Steel |
9 |
81 |
|
9HR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 7-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
9HR-SS |
Stainless Steel |
9 |
81 |
|
9SH-SS
-
Stainless Steel Safety Angle Mobile Ladder Stand
- 1" Stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- 19" platform depth
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- Positive floor locking trip step mechanism
- 400 lb. capacity
- Ships knocked down
- All components except casters and springs are fabricated from high quality stainless steel
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
9SH-SS |
Stainless Steel |
9 |
90 |
|
9SHR-SS
-
Stainless Steel RIP Mobile Ladder Stand
- Rotates in Place (RIP) to reduce turning radius in tight situations
- 1" stainless steel round tube construction
- Clean room finish
- Type 304 #4 brushed finish
- Positive floor locking trip step mechanism
- Steps are 9-1/2" deep, non-slip, raised, perforated, dimpled tread pattern
- 400 lb. capacity
- All components except springs are fabricated from high quality stainless steel
- Ships knocked down - assembly required
- Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
- Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
- Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America, steel and stainless steel
- Maximum rated load: 400 lbs (one person only)
Part Number |
Material |
No. of Steps Incl. Platform |
Platform Height |
9SHR-SS |
Stainless Steel |
9 |
90 |
|